Andrology and male fertility

Bonraybio · LensHooke

Bonraybio Co., Ltd. — LensHooke® — Taiwan

A complete line for male fertility testing: AI-driven optical semen analysis, sperm DNA fragmentation testing and centrifuge-free sperm separation, supplied and serviced in Iraq by TMC.

Represented by TMC in IraqFDA 510(k) K180343 · K202089 · K242830 · K242388CE-IVDEU Rep: MDSS GmbH
LensHooke X3 PRO semen quality analyser

1–2 minutesFull semen report on the X3 PRO, without a microscope

LensHooke X12 PRO sample reports: a semen analysis report and a DNA fragmentation analysis report

Featured instrument

X12 PRO: semen analysis and DNA fragmentation in one system

  • Single- and double-strand DNA fragmentation index added to routine semen parameters
  • Three to six minutes per sample
  • Automatic XY stage, autofocus and Full HD imaging

About the manufacturer

Optical semen analysis, built in Taichung

Bonraybio, founded in 2016 in Taichung, Taiwan and listed on the Taipei Exchange since December 2024, develops AI-driven optical semen analysis systems under the LensHooke® brand.

Its devices are sold in 53 countries and backed by 90 granted patents, spanning routine semen analysis, sperm DNA fragmentation testing and centrifuge-free sperm separation for assisted reproduction.

Founded
2016, Taichung
Listed
Taipei Exchange 6955
Reach
53 countries
Patents
90 granted

Why it matters for your laboratory

Sealed single-use cassettes replace manual chamber loading, so results depend far less on which technician is on shift. Published inter-operator reproducibility is ICC 0.89, and a full X3 PRO report takes one to two minutes without a microscope.

Coverage

Measured parameters

Routine semen parameters on the LensHooke analysers, with DNA fragmentation on the X12 PRO.

  • Sperm concentration (M/mL)
  • Total, progressive and non-progressive motility
  • Morphology — % normal forms
  • Round-cell concentration
  • pH by chromatographic reading
  • DNA fragmentation index (DFI) — X12 PRO only
  • Double-strand DFI — X12 PRO only

Products

Products we supply

Every instrument below is supplied, installed, calibrated and maintained by our own biomedical engineering team, with reagents and consumables delivered under a controlled cold chain.

LensHooke X3 PRO, semen quality analyser for the clinic and andrology bench

LensHooke X3 PRO

Semen quality analyser for the clinic and andrology bench

  • Concentration, total, progressive and non-progressive motility
  • Morphology, round cells and pH
  • Three steps, about one minute; 5-inch touchscreen with video playback
  • Reportable: concentration 2–300 M/mL, motility 1–100%, pH 6.0–8.0
  • FDA 510(k) K242830; correlation with X1 PRO R² 0.99 for concentration
Manufacturer page
LensHooke X12 PRO, laboratory semen analysis system with DNA fragmentation

LensHooke X12 PRO

Laboratory semen analysis system with DNA fragmentation

  • Automatic XY stage, autofocus and Full HD imaging
  • Three to six minutes per sample
  • Adds single- and double-strand DNA fragmentation index
  • Reportable: concentration 0.4–300 M/mL, DFI 0–100%
  • Barcode scanning and network connection; FDA 510(k) K242388
Manufacturer page
LensHooke R10 Plus, sperm DNA fragmentation rapid test kit

LensHooke R10 Plus

Sperm DNA fragmentation rapid test kit

  • Sperm chromatin dispersion (SCD) assay
  • Stains in one minute; the in-progress slide can be preserved
  • Read automatically on the X12 PRO; DFI 0–100%
  • X12 PRO versus reference: slope 1.01, R² 0.99 (n = 130)
Manufacturer page
CA0 / CA1 Sperm Separation Device, centrifuge-free swim-up separation for IUI, IVF and ICSI

CA0 / CA1 Sperm Separation Device

Centrifuge-free swim-up separation for IUI, IVF and ICSI

  • Simple and fast, with no centrifuge
  • CA0 Ø55.62 × 19.23 mm; CA1 Ø55.62 × 21.83 mm
  • Gamma irradiation sterilised
  • Two-year shelf life; storage 2–30 °C
Manufacturer page

Product images are the property of the manufacturer and are reproduced here as their appointed distributor.

Technology

How it works, and where it stops

A camera and an algorithm instead of a counting chamber and manual reading. We also set out the two things the analyser does not do.

Optical + AI image analysis

A built-in video microscope captures real fields inside a sealed disposable cassette. Image processing derives concentration from unit density, motility from frame-by-frame trajectory tracing, and morphology from AI classification.

No preparation

No staining, dilution or centrifugation for routine analysis: load the cassette, insert it and read. Staining applies only to the CR0 morphology slide and the R10/R11 DFI kits.

WHO alignment

Reference values follow the WHO Laboratory Manual for the Examination and Processing of Human Semen, 5th and 6th editions.

Known limits

Volume is not measured by the analyser and is entered separately; morphology below 4% normal forms should be verified manually. We state this up front so your andrology team can plan for it.

The full range

Product range at a glance

We supply, install, calibrate and maintain these systems across all 18 governorates, with reagents and consumables delivered under a controlled cold chain.

ProductWhat it covers
LensHooke X3 PROClinic and point-of-care analyser: concentration, total/progressive/non-progressive motility, morphology, round cells and pH in one to two minutes. 5-inch touchscreen, video playback, LAN and HDMI output.
LensHooke X12 PROLaboratory flagship with automatic XY stage, autofocus and Full HD imaging, analysing over 3,000 sperm per run in three to six minutes and adding single- and double-strand DNA fragmentation index. Barcode scanning and EMR integration.
LensHooke X1 PROThe original point-of-care analyser: concentration, motility, morphology and pH in two to five minutes on a 3.5-inch touch panel.
R10 / R10 Plus / R11 PlusSperm DNA fragmentation kits using the sperm chromatin dispersion assay; the Plus versions stain in one minute. R11 Plus measures double-strand fragmentation.
CA0 / CA1 Sperm Separation DeviceCentrifuge-free swim-up separation for IUI, IVF and ICSI: 1 mL semen with wash medium, 30 minutes at 37 °C, then withdraw 0.5 mL.
Consumables & QCCS1 test cassette, CS3 test slide, CR0 prestained morphology slide, C-KUP CK0 liquefaction cup, X QC beads, reticle and video, and S10 data consolidation software.

Next step

Planning a laboratory, a tender or a replacement?

Send us the scope. We will come back with a configuration, a consumables projection and a service plan, not just a price list.